MEASUREMENT / TEST
TESTING, ADJUSTING & BALANCING / TAB
Appropriate to international standards in air and water lines;
Ventilation ducts should bring the air to the target with minimum leakage and transmission loss in the lines according to the project design.
Therefore, in ductwork air leakage tests;
Location where the channel flows
- Channel surface area
Should be considered. Measurement / test;
EUROVENT and related standards.
Architectural facade is tested by ASTM, BS, DIN, EN standards.
Heat bridge presence and insulation quality are examined.
Impermeability is tested by thermal imaging and thermal insulation.
High user comfort
Healthy indoor environments
CO₂, VOC and similar unwanted gas output is monitored and taken under control.
Natural and mechanical removal systems are checked. Smoke removal mechanism is controlled in critical situation such as fire. Transactions are carried out by NFPA, ISO, EN standards.
Design calculations at national and international standards are checked.
It is applied at the stair pressurization place in accordance with the design.
Air flow and pressure difference values are monitored so as to create an effective flow area.
It is checked that elevator and building critical areas are aware of pressure at maximum values.
The effect of open, closed and automatic doors is taken into account.
FOLLOW US ON SOCIAL MEDIA