HAYSTAT- WI-FI TEMPERATURE / HUMIDITY COMBO SENSOR

  • PRODUCT NAME: HayStat

  • PRODUCT CODE: haystat:v1:p:list
ADD TO CART
VIEW SETUP INSTRUCTIONS

PRODUCT DESCRIPTION

The HayStat is a standard Wi-Fi sensor that transmits temperature and humidity over Haystack protocol. These wall-mount sensors connect to your building automaton network over standard IP based Wi-Fi. They export data as Haystack points, allowing you to quickly and easily pull data to where you need it. No gateways or monthly services required. The sensor incorporates authenticated access and Haystack 3.0 compatibility. The sensor can be read directly from SkySpark, Tridium or any other Haystack 3.0 client. The values can also be read from a standard web browser interface. The browser page is the only thing required to configure the device.

Specifications

The HayStat is a combination temperature and humidity sensor. These wall-mount sensors connect to your building automation network over Wi-Fi, exporting data as Haystack points, allowing you to quickly and easily pull data to where you need it.

• Input Power: 0.15A @ 5VDC
• Humidity Range: 0-100% RH
• Temperature Range: -40-80°C (-40-176°F)
• Temperature Precision: 0.01°C (0.1°F *)
• Operating Temperature: -40°C-125°C (-40°F-257°F)
• Wi-Fi Modes: Wi-Fi b/g/n
• Haystack Version: 3.0

* Temperature data truncated to 0.1°F precision on conversion from Celsius to Fahrenheit

• Humidity Accuracy: ±2%
• Temperature Accuracy: ±0.2°C (±0.5°F)
• Humidity Precision: 0.01%RH
• Wi-Fi Max Range: 75 feet
• Wi-Fi Frequency: 2.4GHz
• Haystack Authentication: HTTP BASIC Authentication
• Supported Haystack Ops: about, read, nav, watchSub, watchUnsub, watchPoll

Quick Setup

The simple design allows quick deployment of many sensors without tools. Each device can be installed with a micro USB cable and power block for simple installation.

Alternatively a permanent 5VDC power terminal can be connected and wired to a central transformer for a more permanent installation.

Once powered the configuration is simple, first connect to the devices internal access point and view the configuration web page, then enter your Wi-Fi and password configuration and press restart.

The device will connect to your Wi-Fi network and obtain a DHCP IP address. Using an IP scanner you can locate the device by its MAC address and connect to it’s IP address with your Haystack client.

VIEW SETUP INSTRUCTIONS

0.15 Amp/5VDC
Power Usage

75 Feet
Wi-Fi Range

HTML
Web-Based Configuration

0.1%
Humidity Sensor Precision

±2%
±2% Humidity Sensor Accuracy

0.01°C
Temperature Sensor Precision

±0.2°C
Temperature Sensor Accuracy

Architecture

incoma commissioning tad cx devreye alma işletmeye alma incoma engineering & consultancy

+90 322 999 32 11

+90 533 199 83 73

info@incoma.com.tr

ADANA

Head Office

Doseme Mh. 60075 Sok. Baysan Is Merkezi A2 No.: 3/401 01060 Seyhan, Adana / Turkey

ISTANBUL

Istanbul Office

Guzeltepe Mah. 15 Temmuz Sehitleri Cad.
5. Levent Konutlari Eyup, Istanbul / Turkey

BODRUM

Bodrum Office

Yalikavak Mah. Flipper Sok.
Gokcebel Mevkii Bodrum, Mugla / Turkey

FOLLOW US ON SOCIAL MEDIA

© Copyright 2013 - | Incoma Engineering & Consultancy LTD. | All Rights Reserved. | Design by Medya Fabrikası Creative Works